Equipment Production

  As the sole distributor of Mining Technologies International Inc., Jereh deals with and provide after-sales service for all MTI equipment in China. MTI has achieved rich experience of manufacturing mining equipment since 1973. Now, thousands of LHD vehicles, mine cars, development drillings, utility vehicles and other vehicles are working around the world.

MTI  Inc.

  Mining Technologies International Inc. is a major manufacturer and supplier of quality mining systems. Since the mining equipment production began in 1973, the equipment of MTI has been widely applied in the countries of North America, South America, Russia and South Africa.
Load Haul Dump Vehicle 
Model Bucket Capacity  Rated Load Breakout Force  Dimension (length X width X height)mm Turning radius
LT-70 0.38m³ 682kg 2722kg 3660×854×1120 Inside2540mm Outside4240mm
LT-210 0.77-0.96m³ 2045kg 4636kg 5665×1370×1805 Inside2540mm Outside4240mm
LT-270 1-1.5m³ 2727kg 5455kg 6172×1422×1854 Inside2388mm Outside4318mm
LT-350 1.9m³ 3409kg 7668kg 7240×13549×2110 Inside2920mm Outside5230mm
LT-410 1.9-2.3m³ 4090kg 7668kg 7240×1730×2160 Inside2920mm Outside5230mm
LT-650 2.7-3.0m³ 6590kg 11455kg 8460×1905×2160 Inside2895mm Outside5665mm
LT-950 5.4m³ 9545kg 16718kg 10010×2464×2390 Inside3580mm Outside6960mm
LT-1050 4.2-5.4m³ 10000kg 14700kg 9630×2184×2362 Inside3480mm Outside6325mm
LT-1650 7-12m³ 16364kg 33300kg 12450×2795×2895 Inside2920mm Outside67300mm

Development drilling 
MTI-1XSB：
 MTI-1SB：
 MTI-2SB：
 MTI-1MB：
 MTI-2MB：
 MTI-1LB：
 MTI-2LB：		 Single-Boom Hydraulic Rig, Drilling Section (width × height) 3m×3m. 
Single-Boom Hydraulic Rig, Drilling Section (width × height) 7.5m×5.5m.
Single-Boom Hydraulic Rig, Drilling Section (width × height) 7.5m×5.5m.
Single-Boom Hydraulic Rig, Drilling Section (width × height) 6.8m×5.8m.
Single-Boom Hydraulic Rig, Drilling Section (width × height) 7.9m×6.1m.
Single-Boom Hydraulic Rig, Drilling Section (width × height) 10m×8.5m.
Single-Boom Hydraulic Rig, Drilling Section (width × height) 11.68m×8.48m.

Bolt Rig 
Eight bolts with each 1.5m long.

Production Drilling
Model Drilling diameter(mm) Rod length(m) Hole depth
CMM2E/CMM2A 89-165 1-1.82 CMM2E/CMM2A Down 183m, up 50m,electric drive,hydraulic remote control 
CD360 89-216 1.22-1.82 CD360 229mm X 203mm(hole diameter), with remote control optional 
CMM 2E 89-165 1-1.83 CMM 2E Down 183m, up 50m,electric drive,hydraulic remote control 

Utility Vehicles

UVT-SL6 Scissor Lift: lifting height 1956mm
UVT-FLC12 Fork Lift: load capacity 2500kg
UVT-FD Flat Deck Truck: load capacity 2500kg
UVT-FT Fuel Truck: fuel flow: 30/gallon; fuel load: 2000kg
UVT-MT Mixer Truck: mixing tank capacity: 4.5m3
UVT-FL Fuel Lube Truck: four kinds of fuels and gross 2500kg.
UVT-CT071 Crane Truck: maximum lifting weight:2000kg
UVT-PC12 Personnel Carrier: Personnel Carrier: 20 persons
UVT-1MB-AL Accordion Lift: distance between working platform and ground: 7836mm.

Trucks
Model Load mm Dimension (length X Width X Height) mm Turning Radius
DT-704 6363kg length5969mmwidth1549mmheight2235mm inside3250mm；outside5180mm
DT-1604 14545kg length7240mmwidth2135mmheight2340mm inside3660mm；outside6480mm
CDT-1604 14545kg length8050mmwidth2440mmheight2590mm inside4570mm；outside8105mm Compartment Changeable 
DT-1804 16364kg length7240mmwidth2388mmheight2360mm inside3530mm；outside6935mm
DT-2604C 23636kg length8990mmwidth2795mmheight2590mm inside4750mm；outside8280mm
DT-3002C 27272kg length9855mmwidth3275mmheight2490mm inside4625mm；outside8865mm
DT-3004C 27272kg length8990mmwidth2945mmheight2590mm inside4675mm；outside8280mm
  K503：Bucket Capacity21-31m³/Load50000kg。